GRT can factory configure a single Matrix Plus card for up to 15 ICDs using up to four different link speeds. Each mode matches one of your ICDs: link speed, image resolution, and pixel format. Matrix Plus cards support interfaces from 1 to 4 Gb/s. A single card can function as a receiver or a transmitter for ARINC 818.
ARINC 818: MATRIX PLUS
USEFUL LINKS
Features
Matrix Plus is a full-featured, high speed ARINC 818 frame grabber, graphics generator and video converter. It comes with a powerful test application. Optional SDK is available for purchase.
Support link rates up to 4.25Gbps
Factory configured for 1-15 ICDs.
SDK - An optional Windows- or Linux-based Software Development Kit (SDK) enables faster development of real-time image and data acquisition systems, camera and sensor emulators, video generators, or other video-intensive applications. The SDK includes a user guide, sample code, and four hours of technical support.
ARINC 818 Receiver & Converter
Matrix Plus cards can capture ARINC 818 video to the software GUI and permit real-time viewing of embedded ARINC 818 data. The cards have a dedicated DVI video port to view the incoming ARINC 818 video on a monitor
-
Line Spy: Echoes out incoming ARINC 818 in real-time
-
Receive and Display ARINC 818 to GUI
-
Capture Video Stream over the PCIe Bus (using StreamPix software)
-
Convert ARINC 818 to DVI
ARINC 818 Transmitter & Converter
Load test images and embedded header data into the Matrix Plus card and transmit using the test software.
-
Convert DVI to ARINC 818
-
Transmit known test patterns over ARINC 818
-
Load real-time images over the PCIe
Test Application
-
Real-Time monitoring of link status and health
-
Display incoming video to GUI or convert to DVI
-
Image compare feature
-
Transmit from pre-recorded video
-
Zoom on regions of interest
-
Explore & Configure Ancillary Data and Container Headers
